inaboxsuper.blogg.se - Mac os driver for hp 4000n

#MAC OS DRIVER FOR HP 4000N INSTALL#

Introduced in 1997 and discontinued in 1999, the LaserJet 4000n was designed to be a small office workhorse printer at the time of its introduction. Finalize the cleaning procedure by following the instructions printed on the cleaning page. Navigate to ‘’CREATE CLEANING PAGE’’ by pressing the button, and then press. Navigate to ‘’PRINT QUALITY MENU’’ by pressing the button.ģ. Finally, you must close the top cover of your HP LaserJet 4000N Printer, and then print a cleaning page by following the instructions given below.Ģ. Once you have correctly aligned the new toner cartridge, you must slide it into the laser printer until it is firmly inserted. Now, you must align the prepared new toner cartridge with the guides of the slot, so the arrow stamped on the new component is pointing towards the toner cartridge compartment. Please note that the length of the sealing tape is approx. After that, you must carefully bend the sealing tape tab (located on the left side of the new component), and then pull it straight out of the new toner cartridge until the sealing tape is completely removed. In the next step of the installation, you must remove the toner cartridge from its packaging, and then redistribute the toner by shaking the unpacked new component several times from side to side. Please be aware that any prolonged exposure of the unpacked new toner cartridge to direct light will inevitably lead to future print quality issues. Please do not shake the used toner cartridge, and avoid touching the fusing area. In the initial phase of the installation, you must open the top cover of your HP LaserJet 4000N Printer, and then remove the exhausted/emptied/damaged toner cartridge by carefully pulling it towards you.

The complete replacement procedure is included below.

#MAC OS DRIVER FOR HP 4000N INSTALL#

It is always a good idea to keep a new toner cartridge for your HP LaserJet 4000N Printer in stock, but please avoid removing the packaging material until you are ready to install the stored new component.

Blank pages – Make sure that the sealing tape has been removed from the installed toner cartridge.

Please install a new toner cartridge in your HP LaserJet 4000N Printer, if any of the listed below print quality issues is reappearing. In some cases, the installed toner cartridge must be replaced even if there are no warning messages displayed on the control LCD. The only available action in this situation is the installation of a new toner cartridge.

‘’TONER EMPTY’’ – All print/copy operations have been disabled due to a completely exhausted/emptied toner cartridge.

Herein, you should install a new toner cartridge in your HP LaserJet 4000N Printer soon after the initial appearance of the ‘’TONER LOW’’ warning message on the control display. The remaining toner will be completely consumed after approx.

‘’TONER LOW’’ – The installed toner cartridge is nearly empty.

The built-in system will display one of the described below messages, once it detects that the installed toner cartridge is near or at the end of its useful life. Your HP LaserJet 4000N Printer features a precise built-in system, which is constantly monitoring the status/condition of all installed consumable components.